Click image to view full size image
250um Bare Fiber Connector Quick Optical Connections Pre Polishing 50N Tensile Strength
Bare Fiber Fast connector
can provide a quick and easy termination of fibers for fiber optical devices test and connection , are available for 250um single mode and milti mode fiber.
Allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels.
This connector system removes any requirement for epoxy, adhesives or costly curing ovens. Pre-polishing , Low loss and Relaible quality made it very popular in FTTH project and other cabling solutions .
Features
- Made on-site without splicing connectors ;
- Field installable
- metal V-shape cavity work well in high and low temperature
- Installation less than 1 minutes
- Reliable and superior optical performance
Application
- FTTH project usable
- Fiber cable field quick repair
Technical Specification:
| Item | Technical Data |
| Cable type | 3.1×2.0 mm drop cable |
| Connector type | Bare Fiber Fast Connector |
| Fiber dimension | 125μm |
| Cover dimension | 900μm |
| Fiber type | SM |
| Insertion loss | 0.3dB,max 0.5dB(1310nm&1550nm) |
| Return loss | UPC ≥50dB APC≥60dB |
| Tensile strength | >50N |
| Operating temperature | -40°C ~+75°C |
| Storage temperature | -40°C ~+80°C |
| Temperature cycling | IL change≤0.3dB,RL change≤5 dB |
| Vibration | IL change≤0.3dB,RL change≤5 dB |
| Low Temperature Storage-40°C | IL change≤0.3dB,RL change≤5 dB |
| Damp Heat,85°C,85%H | IL change≤0.3dB,RL change≤5 dB |
| Tensile test online 20N | IL change≤0.2dB,RL change≤5 dB |
| Mechanical durability 500times | IL change≤0.2dB,RL change≤5 dB |
250um Bare Fiber Connector Quick Optical Connections Pre Polishing 50N Tensile Strength
